![background image](http://html1.mh-extra.com/html/ducati/diavel-2014/diavel-2014_owners-manual_2537646115.webp)
ABS setting function
This function allows disabling and enabling the ABS
system.
To gain access to this function display the "setting"
menu page 80, use buttons (1) or (2) to select the
"ABS" function and press the reset button (4) to shift
to next page.
Function status is highlighted on the display (green if
ON or yellow if OFF); use buttons (1) or (2) to move
the left arrow on the new setting, and keep the reset
button (4) pressed for 3 seconds to confirm.
Once these 3 seconds have elapsed, system will
check that the request was completed successfully;
during this check time "PLEASE WAIT..." will appear.
Once check time has elapsed, the new setting will be
displayed.
Note
If the disabling request was not completed
successfully, repeat the procedure. If the problem
persists, contact a Ducati Dealer or Authorised
Service Centre.
To quit the setting function, press the reset button (4)
with "EXIT" highlighted.
114
Summary of Contents for Diavel 2014
