Ducati DESERTX Page 301 Owner'S Manual Download

Page: 301 / 332

Important

Do not use any additives in fuel or lubricants. Using them could result in severe damage of the engine

and motorcycle components.

Attention

The motorcycle is only compatible with fuel having a maximum content of ethanol of 10% (E10).

Using fuel with ethanol content over 10% is forbidden. Using it could result in severe damage of the engine

and motorcycle components. Using fuel with ethanol content over 10% will make the warranty null and void.

Important

These references identify the fuel recommended for this vehicle, as specified by the European

Regulation EN228.

300

Summary of Contents for DESERTX













































































































































































































































































































































Search results

Summary of Contents for DESERTX

Reviews:

Related manuals for DESERTX

Brands by name

Popular brands

Ducati DESERTX, Owner'S Manual

Search results

Summary of Contents for DESERTX

Reviews:

Related manuals for DESERTX

Brands by name

Popular brands