24
flames, or any inflammable liquids.
- Clean the device with a slightly humid towel after you
switched off the circuit breaker which supplies the device.
- Do not use any chemical solvent nor abrasive products
to clean the surface of the device at the risk of scratching,
damaging, or even distorting it.
- The heater must not be located immediately below a
socket outlet.
- Regarding the instructions for the heater intended to be
fixed by screws on the method of fixing, thanks to refer to
the section “INSTALLATION” .
Warning: This product is suitable for bathrooms zone
2 and outside zone; according to the national wiring rules
(For France NF C 15-100)
Note: The drawing is for reference only.
We suggest that you to contact a professional electrician
for assistance.
2. INSTALLATION IN THE BATHROOM
