Original Instructions
NOTE
: If the engine fails to start after
three pulls, repeat the process.
12. Once the engine is running, put the starter rope Into the rope guide .As shown in
Fig 14
To stop the engine
As shown in Fig 15
Release the engine start/stop lever, it will return to its Initial position, the engine
will automatically switches off.
To clean a flooded engine
NOTE:
if the engine won’t start after you have Operated the starter several times,
the engine may be flood with excess fuel. Use following procedure to clear and start a
flooded engine.
9. Release the engine start/stop lever to stop engine.
10. Remove the spark plug, dry it, and then reinstall it.
NOTE:
Install the spark plug carefully by hand, to avoid cross-threading. After the
plug is seated tighten 1/8 to 1/4 turn with socket spanner of spark plug to compress
the washer.
11. Pull the engine start/stop lever toward upper handle.
12. Operate the starter as described above.
14
Fig 14
Fig 15
