background image

8

9

CLEANING YOUR TAMPER

• To clean your Tamper, wipe with a damp cloth using mild detergent.
• Do not fully submerge the Tamper.
• Do not place the tamper in a dishwasher.
• Allow Tamper to dry fully before storing.

TROUBLESHOOTING

POSSIBLE CAUSE(S)

SOLUTION(S)

COFFEE FLOW IS SLOW (OVER EXTRACTED) 

Tamping pressure is too high.

Reduce Tamping pressure.

Level of tamped coffee is too high.

Make sure you push down fully so that the 

guide touches the portafilter.

Use less coffee.

Coffee grind is too fine.

Use a coarser grind.

COFFEE FLOW IS TOO FAST

Tamping pressure is too low.

Increase tamping pressure.

Tamping is not level.

Make sure you push down fully so that the 

Levelling Guide touches the portafilter.

Coffee grind is too coarse.

Use a finer grind.

COFFEE GROUNDS STICK TO THE TAMPER

Tamper is damp.

Dry the Tamper before use.

You are not twisting the Tamper as you 

remove it from the basket.

Twist the Tamper as you remove it from the 

basket.

WATER IS LEAKING AROUND THE PORTAFILTER DURING EXTRACTION

Coffee grounds on the Portafilter rim are 

stopping a seal forming.

Wipe the rim of the Portafilter clean before 

inserting into machine.
Make sure the brewhead on your coffee 

machine is clean.

NO COFFEE IS FLOWING/MY MACHINE ISN’T WORKING

Make sure you understand how to operate 

your machine.

Refer to your machine’s instruction book. 

Most manufacturers provide their instruction 

books online.

I’M RECEIVING INCONSISTENT COFFEE AND MY PUCK IS WET

Not enough coffee in the Basket. This allows 

water to remain on top of the coffee grinds 

after extraction.

As a guide, after tamping the top surface 

of the Tamping Plate should align with the 

Rim of the Basket. Add more coffee to the 

basket, or use a coarser grind size. 

Please 

note: if you are using a double walled 

filter cup then you will always get a 

wet puck after extraction.

MY PORTAFILTER WILL NOT LOCK ONTO MY MACHINE (GROUPHEAD)

 Too much coffee in the Basket.

As a guide, after tamping the top surface of 

the Tamping Plate should align with the Rim 

of the Basket.

Add less coffee to the basket or use a finer 

grind size.

Remove the Tamper and 

clean any excess coffee 

grounds from the rim of the 

Basket. You are ready to 

put the portafilter into your 

machine and make great 

coffee.

USING YOUR TAMPER CONT.

4

Reviews: