DISPLAY OPTIONS
TUNING INTO AN FM STATION
FM MODE
You can scan up and down radio frequencies automatically
in FM mode.
•
•
Press the SCAN button to start scanning up the radio
frequencies.
•
•
The radio will stop when it finds a station with
sufficient signal strength. Keep pressing the SCAN
button until you reach the station you require.
•
•
The display will show the station name if RDS (Radio
Data System) is available, or if not, its frequency.
•
•
To scan down the radio frequencies, press and hold
the SCAN button for three seconds and repeat the
same process.
•
•
When the waveband end is reached, the radio will
start scanning again from the opposite end of the
waveband.
•
•
You can also tune your radio manually by rotating
the TUNE knob. The station frequency will be
displayed on the screen.
17
In FM mode, the radio offers four display options. Keep
pressing the INFO button to cycle through the various
options.
•
•
Scrolling text
– displays scrolling text message such
as artist/track name, phone-in number, etc. If the
station has no RDS service, display will
show ‘<Radiotext>’.
•
•
Program type
– displays type of station being
listened to e.g. Pop, Classic, News, Sport etc. If the
station has no RDS service , display will show
‘< Program Type >’.
•
•
Time and date
– displays current time and date
eg. 12:03 25-12-2008.
•
•
Station frequency
– displays current station
frequency eg. 101.9FM.
NOTE: WHEN TUNED INTO THE FM BAND,
ADDITIONAL INFORMATION IS ONLY DISPLAYED
WHEN THE RADIO IS ABLE TO RECEIVE RDS
INFORMATION FROM THE BROADCASTER.
2008.03.18_DLR1GB_IB.qxp 19/03/2008 12:48 Page 17
