A
A.
B.
C.
D.
E.
F.
G.
H.
I.
J.
K.
LID
TOUCH PAD
LID PANEL
SPOUT
WATER FILTER
STAINLESS STEEL BODY
LID RELEASE
VIEWING WINDOW
BODY PANEL
ON/OFF SWITCH
POWERBASE
KNOW YOUR KETTLE
1
Place the kettle as close to the wall socket
as possible. When in use ensure the kettle is
not placed under kitchen cabinets.
Use the shortest cord possible. Wrap excess
cord round the cord tidy on the base of the
kettle.
Plug the kettle into the power socket and
turn the power on. When not in use ensure
the kettle is unplugged.
POSITION
D
B
F
K
J
C
I
BEFORE FIRST USE
BOILING WATER
FILLING YOUR KETTLE
CLEANING & CARE
All illustrations are for representation only, your
model may vary from illustrations shown.
3
PLUG IN
2
CORD TIDY
1
Let the kettle cool down completely before
cleaning.
Wipe the outside and inside surfaces of the
kettle with a damp cloth
Open the lid. Hold the top of the filter, pull
up and out of the kettle. Rinse under a tap
while carefully brushing it with a soft brush.
Rinse the kettle out with fresh water.
Use descaling products suitable for kitchen
appliances, these are readily available online
or from most supermarkets or department
stores. Use as per instructions on the packet.
Follow these few simple steps to minimise
scale build up in your kettle: Empty the kettle
after each use; do not allow water to stand
in the kettle overnight. Use filtered water
instead of tap water. Descale the kettle
regularly, at least once a month. If you live in
a hard water area you may need to descale
more often. When descaling has finished,
empty the kettle and rinse it out numerous
times with fresh water, then refill with fresh
water, boil, then discard boiled water.
THE BODY
3
DESCALE REGULARLY
2
WATER FILTER
4
Press the ‘On/off’ switch down. The viewing
window will illuminate and the kettle will
start to heat up.
If the kettle is accidentally switched on with
no water inside, the boil-dry device will
switch off the heating element to prevent
damage to the kettle.
The kettle will automatically turn off after the
water has boiled.
To turn off before the water has boiled lift
the ‘On/off’ switch up.
To avoid the risk of splashing, once the kettle
has boiled wait 10 seconds then pour slowly.
Do not over-tilt the kettle.
TURN ON
6
POURING
5
TURN OFF
1
Press the lid release button on the handle to
open the lid.
WARNING: IF THE KETTLE HAS
JUST BOILED, IT WILL BE FULL OF
STEAM, WHICH WILL ESCAPE AS
SOON AS THE LID IS OPENED.
Fill the kettle through the lid opening. Do not
fill through the spout.
Save energy, only boil what you require. Use
at least one cup of water (250ml). The water
level must stay below the ‘max’ mark.
Push the lid down using the touch pad to
close.
WARNING: IF THE KETTLE HAS
JUST BOILED, THE LID WILL BE
HOT. USE THE TOUCH PAD TO
CLOSE THE LID.
OPEN LID
3
CLOSE LID
2
FILLING
In the interest of improving products, Dualit Ltd. reserves the right to change
the product specification without prior notice.
E
H
G
