18
19
TROUBLESHOOTING
IMPORTANT NOTICE: Product failure due to the build up of limescale is not
covered by guarantee - descale regularly.
+
TO CONTACT CUSTOMER SERVICES, PLEASE EMAIL [email protected]
WITH YOUR MODEL AND SERIAL NUMBERS.
POSSIBLE CAUSE(S)
SOLUTION(S)
THE CAPSULE MACHINE DOES NOT TURN ON
1. The unit may not be properly
connected to the power supply.
1.1 Check the plug is in the socket and the switch is turned
on.
1.2 Check and replace the fuse if necessary. Note: in order
to open the plug, remove the label to reveal the screw.
1.3 The machine may be in Standby Mode, which activates
automatically after 10 minutes. In this Mode the tea and
coffee lights turn off to conserve energy. You can exit
Standby Mode by pressing any Button.
THE CAPSULE MACHINE IS NOT DISPENSING TEA OR COFFEE
1. The Coffee or Tea Buttons
illuminate without flashing, but
no tea or coffee is dispensed.
1.1 The Nozzle could be blocked. Follow the Cleaning
instructions on page 16. If this does not clear the blockage
refer to page 14 to descale your machine.
1.2 The inserted capsule could be faulty. Wait a few
moments before opening the Lever, flush the machine
through and then try again with another capsule.
1.3 Ensure that the Lever is properly closed and the Capsule
Basket is empty.
1.4 There could be air trapped in the pipework. Remove
the capsule and ensure that the Water Tank is full. Press the
Coffee or Tea Button. Water should exit the Nozzle. If it
doesn’t, press again to release the trapped air.
2. You may have run out of
water.
2. Remove the Water Tank and fill with fresh water.
3. The Water Tank may not be
seated correctly.
3. Position by aligning the connection and pushing down firmly.
Tip: Bubbles rise in the Water Tank when it is correctly seated.
Then push the Water Tank Lid down to cover the Water Tank.
MY MACHINE IS MAKING A LOUD NOISE OR EXTRACTION HAS STOPPED MID USE
1. You may have run out of
water (the machine is making
a noise and the Buttons are
flashing).
1. Turn the machine off and remove the Water Tank. Refill
with fresh water and then place the Water Tank back onto
the machine. Follow instructions on page 08-09 before
dispensing.
2. There may be an airlock in
the pipework.
2. Remove the capsule and ensure that the Water Tank is
full. Press the Coffee or Tea Button. Water should exit the
Nozzle. If it doesn’t, press again to release the trapped air.
TO REPLACE FUSE,
REMOVE SILVER LABEL
TO ACCESS SCREW
.
*Nespresso
®
trademark is owned by Société des Produits Nestlé S.A
MY CAPSULE MACHINE IS LEAKING
1. There is water beneath the
capsule machine.
1.1 There will be a small amount of condensation forming
underneath the capsule machine after making numerous
beverages. This is safe and does not mean the machine is
leaking.
1.2 Ensure that the Water Tank has been correctly inserted.
When refilling with water, always switch off the capsule
machine and only then remove and refill the Water Tank.
Otherwise, water could leak from the appliance. If you still
feel the capsule machine is leaking, stop, unplug and contact
Dualit customer services
+
for help.
MY COFFEE HAS NO CREMA
1. Little to no crema is
produced.
1.1 Each time coffee is dispensed, essential oil is deposited in
the Nozzle. Descale and follow instructions on page14-15.
1.2 Use Dualit or Nespresso
®
capsules
*
.
1.3 Check your capsules are in date. Stale coffee affects
crema and taste.
1.4 Ensure that you are not using the Tea Button for Coffee.
FACTORY SETTINGS
1. What is the factory setting of
the capsule machine?
1. The factory setting of the machine is programmed to 35ml
for the Espresso Button, 70ml for the Lungo Button and
180ml for the Tea Button.
2. Can I change the factory
settings?
2. Yes. Please follow ‘Programmable Dosing Memory’ on
page 12.
COFFEE & TEA BUTTONS
1. What happens if I repeatedly
press the Buttons while tea or
coffee is being dispensed?
1. The capsule machine interrupts the dispensing of the tea
or coffee prematurely.
2. Is the Programmable Dosing
Memory deleted when the
appliance is unplugged?
2. No, the programming is not affected by unplugging the
appliance.
3.
The Buttons flash for a long
time. When is the capsule
machine ready to use?
3.
It takes a little time for the capsule machine to achieve
the optimum water temperature (approx. 30-60 seconds).
Once it does, the Buttons will illuminate and will be ready to
dispense tea or coffee.
CAPSULES
1. The capsule does not drop
automatically into the Capsule
Basket when I lift the Lever.
1.1 The Capsule Basket could be full. Please empty it.
1.2. Ensure that you fully lift the Lever.
2. The capsule cannot be
inserted correctly.
2. The Capsule Basket could be full. Please empty it.
