13
12
MINIMISING SCALE
BUILD UP
follow these few simple steps to minimise scale build up in
your kettle.
• Empty the kettle after each use; do not allow water to
stand in the kettle overnight
• Use filtered water instead of tap water
• Descale the kettle regularly, at least once a month, using
a proprietary brand of descaler. In areas of very hard
water, descaling may be necessary more often
• When descaling has finished, empty the kettle and rinse
it out numerous times with fresh water, then refill with
fresh water, boil, then discard boiled water.
If the kettle is not working correctly, check that:
• You have followed the instructions correctly
• The plug fuse has not blown
• The mains supply/fuse/circuit breaker has not
blown/tripped
• If the powercord is damaged it must be replaced by a
special cord set available from Dualit. This part should
only be refitted by a competent electrician.
AFTER SALES SERVICE
Check the following if your kettle is not working before
contacting place of purchase or Dualit Ltd.
• Use descaling products suitable for kitchen appliances,
these are readily available online or from most
supermarkets or department stores. Use as per
instructions on the packet.
• Follow these few simple steps to minimise scale build
up in your kettle: Empty the kettle after each use; do
not allow water to stand in the kettle overnight. Use
filtered water instead of tap water. Descale the kettle
regularly, at least once a month. If you live in a hard
water area you may need to descale more often. When
descaling has finished, empty the kettle and rinse it out
a minimum of 3 times with fresh water, then refill with
fresh water, boil, then discard boiled water. Failure to
do so can cause injury.
DO NOT BOIL KETTLE WITH
DESCALING SOLUTION IN IT.
DESCALING
Regular descaling is essential to keep your kettle in good
working order.
D
ES
CA
LE
R
PUSH THEN
PULL OUT
MINIMUM
1 CUP (250ml)
U
N
PL
U
G
WH
EN NO
T IN
U
SE
U
N
PL
U
G
WH
EN NO
T IN
U
SE
U
N
PL
U
G
WH
EN NO
T IN
U
SE
