Version : 1.20
a
6
4. Installation
1.
Place the wall mount bracket on the wall and fix it tightly with Screw (Φ4mm Flat head) -4nos.
2.
Connect the power and communication cable to
QD
E-950’s Terminal
Block.
(Refer to chapter 5. Connection Diagram)
3.
Tilt the device slightly and insert to the wall mount from the top. Fix it tightly with 3*4 Flat head
machine screw.
<Picture 1.Installation>
※
※
※
※
Caution
- Do not push the device/ wall mount bracket too hard when fixing it to the wall.
- Screw has to be reconsidered depending on the wall’s material and condition.
- Please place flat panel between the wall mount bracket and the wall if the wall is not flat. It could cause
a problem to assemble the device if the bracket bent.
3*4 Flat head machine
Φ4mm Flat head screw
QDE-950-4 User Manual
