12
XML8110
OPERATION
iPod Dock Operation
Some iPods have a thinner design, and may
require changing the rear rubber support at the
back of the iPod dock for the best fit.
To change the rear rubber support, pull upward
on support to remove it. Then replace the support
with the thicker rubber support that is included
in the box.
For the 1st generation, 2nd generation and 4th
generation iPod Nano devices, the left side iPod
dock support can be replaced with a larger rubber
support, for the best fit.
To change the left side rubber support, pull
outward on the rubber support to remove it. Then
replace the support with the larger rubber support
that is included in the box.
To dock an iPod, first spread apart the side supports
of the iPod dock. Then line up the dock connector
and insert the iPod into the dock. Release the side
supports to secure the iPod.
All manuals and user guides at all-guides.com