XDVD8281
OPERATION
56
Troubleshooting
Problem
Cause
Action
Unit will not turn on
(no power)
Yellow wire not connected or incorrect voltage
Red wire not connected or incorrect voltage
Check connections for proper voltage (11~16VDC)
Black wire not connected
Check connection to ground
Fuse blown
Replace fuse
Unit has power
(but no sound)
Speaker wires not connected
Check connections at speakers
One or more speaker wires touching each
other or touching chassis ground
Insulate all bare speaker wires from each other and chassis
ground
Unit blows fuse
Yellow or red wire touching chassis ground
Check for pinched wire
Speaker wires touching chassis ground
Check for pinched wire
Incorrect fuse rating
Use fuse with correct rating
Unit has audio
(but no video)
Parking brake safety circuit not connected
Parking brake not applied
Check connections at parking brake
Apply parking brake as described on page 33
No video display
(when in reverse)
Reverse circuit not connected
Vehicle is not in reverse
Check connections at reverse lamp
Select reverse gear
DVD does not start playback
Physical defect in media
Wrong region
Check media for scratches
Use discs labeled "Region 1" or "All" only.
IR remote does not work
Dead battery
Replace battery
Excessive skipping
Unit is not mounted correctly
Check mounting sleeve
Physical defect in media
Check media for scratches
Bad Disc appears
on display
Focus error or disc is in upside down
Press eject or RESET
Incorrect Region Code
appears on display
Region code error
Use only DVDs labeled “Region 1” or “All” only.
Front panel will not
open/close
Front panel obstructed
Remove the obstacle and press
to resume the monitor
open/close sequence.
