20
XDVD770BT
OPERATION
Bluetooth Operation
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The XDVD770BT broadcasts the pairing signal constantly when no
devices are currently connected. Complete the pairing sequence
from your Bluetooth device. Refer to the owner's manual for your
device for more details.
The device name is "Dual Multimedia Receiver".
The Bluetooth passcode "0000"
Note:
The XDVD770BT can be in any mode of operation when
pairing is performed.
If a device is currently connected, press and hold
to
disconnect the current device before a new device can
be paired. Then begin the pairing sequence from the new
Bluetooth device.
Most Bluetooth devices support the auto-connect feature, and
will connect automatically if the device is in range when the
XDVD770BT is powered-on.
Press and hold
for 3 seconds to disconnect a connected
device. The device will remain paired and appear in the PAIRED
DEVICES menu but will not be connected.
Press
once. “Enter Phone Number” appear on the display. Using
the remote control, enter the phone number using the 0-9 buttons.
Press
or SELECT on the remote control or front panel to begin
dialing.
Preparation
Pairing a New Device
Pairing Additional
Devices
Connecting a Device
Disconnecting a
Device
Manual Dialing
Summary of Contents for XDVD770BT
Page 27: ...26 XDVD770BT OPERATION Notes...
