26
DVD Setup - Parking Brake Initialization
Watching Video
Parking Brake Initialization
SAFETY WARNING
s4HEVIDEODISPLAYOFTHEINDASHUNITWILLNOTOPERATEWHILETHEVEHICLEIS
moving. This is a safety feature to prevent driver distraction. In-dash video
functions will only operate when vehicle is in Park and the
PARKING BRAKE
is engaged. It is illegal in most states for the driver to view video while the
vehicle is in motion. Refer to local laws in your area.
s4HEVEHICLEMUSTBEINPARKANDTHEPARKINGBRAKEAPPLIEDTOVIEWVIDEOONTHE
in-dash monitor.
s!SASAFETYFEATURE
!!Safety Warning!!
blue screen will show on the display
WHENTHEVEHICLEgSPARKINGBRAKEISNOTENGAGED6IDEODISPLAYONTHEINDASH
MONITORISNgTALLOWEDUNTILTHE
PARKING BRAKE
is engaged. Connect the
yellow/blue
PARKING BRAKE
wire to the brake switch circuit
as described
on page 6
.
Note:
DVD and AUX AV audio can be heard while the vehicle is in
motion without engaging the parking brake.
Follow these two initialization procedures carefully to allow video playback on
THE8$6$INDASHMONITOR
4HEREARETWOWAYSTOINITIATETHE0!2+).'"2!+%SEQUENCE
If vehicle is moving:
3TOPVEHICLEPUTIN0ARKMAKESURE0!2+).'"2!+%ISOFFRELEASED
$EPRESS0!2+).'"2!+%FORSECOND
2ELEASE0!2+).'"2!+%FORSECOND
$EPRESS0!2+).'"2!+%PERMANENTLY
If vehicle is already parked and the PARKING BRAKE is already applied:
+EEPVEHICLEIN0ARK0!2+).'"2!+%SHOULDBEON
2ELEASE0!2+).'"2!+%FORSECOND
$EPRESS0!2+).'"2!+%FORSECOND
2ELEASE0!2+).'"2!+%FORSECOND
$EPRESS0!2+).'"2!+%PERMANENTLY
Note:
The parking brake transition time must be less than 2 seconds between
depress and release. This procedure must be repeated anytime the unit or
vehicle ignition is turned off.
XDVD3101
OPERATION
