Portable Device Mount Installation
1. Remove the mounting sleeve.
2. Line up the bracket with the right side of the
head unit as shown above.
3. Insert the supplied screws into the two
mounting holes and tighten.
4. Once the bracket is in place, locate the
mounting post.
5. Thread the mounting post by hand, clockwise
into the tab on the bracket.
6. Tighten the mounting post using the supplied
wrench.
7. Remove the plastic nut from the device mount,
and slide it onto the mounting post.
8. Carefully snap the device mount onto the ball
shaped end of the mounting post.
9. Tighten the plastic nut by hand until tight.
Adjust the tension of the cradle using this nut.
mounting bracket
mounting bracket
mounting bracket
device mount
plastic nut
mounting post
mounting post
wrench
screws
