5
The front panel is semi-permanently attached during
assembly. Please refer to the separate yellow instructions
(before installation) to make the front panel removable.
With the unit off, press
OPEN
to allow the front panel to slide
down. Gently squeeze the release tab located on the bottom
center underside and pull front panel down and away from
unit to remove. To install, insert left side first, then push
right side to secure.
Press
PWR
or any other button (except
EJECT
or
OPEN
)
to turn the unit on. Inserting a disc will turn the unit on
automatically. Press
PWR
to turn the unit off.
Press
MODE
to select between tuner, CD player and auxiliary
input. Modes of operation are indicated in the display.
Press
LOUD
to activate and deactivate loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Adjust volume using rotary encoder (00-46).
Press and hold
PWR
for 3 seconds to program currently
selected volume level. "P-VOL" and the current volume level
will momentarily appear in the display.
Press
EQ
to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Press
DISP
to select between clock and radio frequency
(tuner mode), clock and CD track/elapsed time (CD mode), or
clock and AUX (AUX mode).
With the unit on, press and hold
DISP
until the clock begins
to flash, then release. Press
TUNE
nn
to adjust the
hours and
TUNE
ll
to adjust the minutes. Press
DISP
momentarily to save the selected time.
Front Panel Note:
Front Panel Removal
Power On/Off
Mode
Loudness
Volume
Programmable
Turn-On Volume
Preset EQ Curves
Display
Set the Clock
XDM7510
OPERATION
General Operation
