General Operation
5
XDM6800
OPERATION
Press REL and pull away from the left side to remove.
To re-install, insert right side of faceplate first then push left
side to secure.
*For semi-permanent faceplate installation, remove trim ring and install
supplied Phillips head #1 screw through left side of mounting frame into
faceplate.
Press PWR or any other button (except eject) to turn the unit
on. Inserting a CD will turn the unit on automatically. Press
PWR to turn the unit off.
Press MODE to select between tuner, CD player and
auxiliary input. Modes of operation are indicated in the
display.
Press LOUD to activate and deactivate the loudness contour
curve. Activating this feature will enhance the bass and
treble frequencies when listening to music at low volumes.
Adjust volume using rotary encoder (00-46).
Press and hold PWR for 3 seconds to program currently
selected volume level.
Press rotary encoder for 3 seconds to turn confirmation
beep on/off.
Press MUTE to silence the audio. Press any button to cancel.
Press DISP to select between clock and radio frequency
(tuner mode) or CD track/elapsed time (CD player mode).
With the unit on, press and hold DISP until clock begins
to flash, then release. Press TUNE
nn
to adjust the hours
and TUNE
ll
to adjust the minutes. Press DISP
momentarily to save the selected time.
The clock will display 12-hour AM/PM time in U.S. frequency
spacing mode (6:00 AM). In European frequency spacing
mode, the clock will display 24-hour time (06:00).
Faceplate Removal
Power On/Off
Mode
Loudness
Volume
Programmable
Turn-On Volume
Confirmation Beep
Mute
Display
Set the Clock
12/24-hour Clock