Power On/Off
Mode
Auxiliary Input
Volume
Programmable
Turn-On Volume
Mute
Preset EQ Curves
Display
Set the Clock
12/24-hour Clock
General Operation
XD230M
OPERATION
5
Press
POWER or any other button (except eject) to turn the
unit on. Inserting a disc will turn the unit on automatically.
Press
POWER to turn the unit off.
Press
MODE to select between Tuner, CD player and
auxiliary input. Modes of operation are indicated in the
display.
Note: CD mode will not appear unless a CD is inserted.
Insert 3.5mm plug to connect the headphone or line output
from your portable audio device.
Adjust volume using rotary encoder (00-46).
To set the turn-on volume level, press and hold POWER
for 3 seconds to store the currently selected volume level
in memory. "P-VOL" and the current volume level will
momentarily appear in the display. If no volume level is
programmed, the unit will remember the last volume level.
Press
MUTE to silence the audio. “MUTE” will flash in the
display. Press MUTE again to cancel.
Press
EQ to select between POP, JAZZ, CLASSIC, BEAT,
ROCK and OFF (default) equalization curves. Any adjustment
to the Bass or Treble settings automatically cancels the
current EQ curve (if one is selected).
Press
DISP to select between clock and different types of
information, such as radio frequency or the CD track/elapsed
time information.
From Tuner or CD mode, press and hold DISP until the clock
begins to flash, then release. Press TUNE
nn
to adjust
the hours and TUNE
ll
to adjust the minutes. Press DISP
momentarily to save the selected time.
The clock will display 12-hour time in USA frequency spacing
mode (10
:
00). In European frequency spacing mode, the clock
will display 24-hour time (22:00).