11
MXD136BT
OPERATION
Bluetooth
®
Operation
Receiving and Ending Phone Calls
Incoming phone calls will automatically appear on the
display and a ring tone will be heard.
Note
: The volume of the ring tone depends on the volume
level of the unit. The incoming ring tone may not be heard if
the volume is set to a low level or mute is activated.
• Press
to receive the incoming phone call.
• Press
to refuse the incoming phone call.
Note
: If
Auto Answer
is set to
ON
in the setup menu, all
phone calls will be received automatically.
During an active phone call, press
to end a phone call.
If the phone call was received when listening to music in
another mode, the unit will resume the previous mode.
Receiving a Phone Call
Ending a Phone Call
During a Phone Call
Turn the
volume knob
to adjust the volume level during
a phone call. Bluetooth mode has a separate volume
level from the main volume of other modes. The unit will
remember the volume level in Bluetooth mode and always
return to the last volume level for each phone call.
Press
MUTE
during a phone call to turn the unit's external
microphone off. Press
MUTE
again to resume microphone
operation.
Press
DISP
during a phone call to transfer the call from the
unit to the cell phone. Press
DISP
again to toggle the audio
back to the unit.
During a phone call, when there are no additional incoming
calls, press
to place the call on hold. Press
again to
resume the phone call.
Note
: Audio transfer, call waiting and call hold must be
supported by the mobile phone and service provider to
function properly.
Volume
Microphone Mute
Audio Transfer
Call Hold
