6
MXD135BT
OPERATION
General Operation
Press
RELEASE
and pull away from the left side to
remove. To re-install, insert right side of faceplate first
then push left side to secure.
Press
or any other button
to turn the unit on. Press and
hold again to turn the unit off.
When the unit is on, press
momentarily to mute the
audio. Press
again to return to previously-selected
volume.
Press
MODE
to select between AM/FM, USB, Bluetooth or
auxiliary input modes. Modes of operation are indicated in
the display. USB mode will not appear unless a USB device
is connected.
The radio frequency (tuner mode) or MP3/WMA title/track
information (USB mode) will be shown by default. Press
DISP
to display the clock. The default display will return
after five seconds.
When in USB mode, the display will alternate between
track number/elapsed time and available MP3/WMA
information, including file name, song title, artist name,
album name and folder name.
Press
RESET
upon initial installation or if abnormal
operation occurs. Reset button is located behind the front
panel.
Press
DISP
to display the clock, then press and hold
DISP
until the hours will flash. Press
TUNE
nn
to adjust the
minutes and
TUNE
ll
to adjust the hours.
Insert a 3.5mm connector in the front panel AUX port.
Connect the other end of the 3.5mm connector to the
headphone output of an audio device, MP3 player, etc.
Adjust volume using the
volume knob
(00-40).
Faceplate Removal
Power On/Off
Mute
Mode
Display
Reset
Set the Clock
Auxiliary Input
Volume