OPERATION
8
Features / Specifications
Power Out
put
•50 Watts x 4 channels @ 4 Ohms+ 200 Watts x 1 channel (sub)
•75 Watts x 4 Channels @ 2 Ohms+ 300 Watts x 1 channel (sub)
•150 Watts x 2 Channels @ 4 Ohms (bridged)
•600 Watts Peak Power Output
Fuse Rating:
40A x 2
Signal to noise ratio:
> 70dB (THD < 0.5% @ 4
Ω
, 14.4V)
Frequency response:
35
Hz
-30kHz (channel 1-4); 15-250Hz (channel 5/sub)
Channel separation:
≤
48dB
Frequency response:
35Hz – 30kHz full range
Line level input sensitivity:
200mV to 8 Volts
Speaker level input sensitivity:
600mV to 20 Volts
Input impedance:
22k0hm
Amplifier dimensions:
8.89” x 3.09” x 1.58” (226 mmx 78.5mm x 40mm)
• Class D
• Total Harmonic Distortion (THD):
≤
1%
• 4 Layer Conformal Coated PCB Assembly
• Variable Bass Boost @50Hz (0-12dB)
• MOSFET Power Supply
• 12dB/Oct. Low/High Pass Electronic Crossover
• Variable High-Pass Crossover:
3
5
Hz
-
30k
Hz (RF/RR)
• Variable Low-Pass Crossover: 35-250Hz (Sub)
• Variable Gain Controls: Front, Rear, Sub
• Turn-On/Off Muting Circuitry (Soft Mute)
• Ground Loop Isolation Input Circuit
• Corrosion Resistant Nickel Plated RCA, Power, and Speaker Connections
• RCA and High Level Speaker Inputs
Design and specifications subject to change without notice.
