Dual AXXERA XDMA7800, Installation & Owner'S Manual, Page: 10 / 36

10
XDMA7800
General Menu
Seek Tuning
Manual Tuning
Scan Tuning
Band
Storing and Recalling
Station Presets
Press TUNE
nn
or TUNE
ll
for more than one second
to seek the next strong station.
Press TUNE
nn
or TUNE
ll
momentarily to move
radio frequency up or down one step at a time. Press and
hold to advance quickly.
Press SCAN on the remote control momentarily to preview
strong stations on the current band, pausing for five
seconds at each. Press SCAN on the remote control again
to cancel.
Press BAND to select between FM1, FM2, FM3, AM1 and
AM2 bands. Up to six presets can be programmed for each
band.
Up to 18 FM stations and 12 AM stations can be stored
in memory. To store a station, select the desired band and
station. Press and hold the desired preset button (1-6) for
more than two seconds. When stored, the preset number
will appear in the display. The station can be recalled by
pressing the corresponding preset button.
AM/FM Tuner Operation
Setup Menu
Menu
Function
Options
Clock
Enables/disables the clock to be displayed on the LCD when the XDMA7800 is powered
off using the power button.
Auxiliary
Enables/disables the 3.5mm auxiliary input on the front panel.
• On : The auxiliary input is enabled. ( default )
• Off : Auxiliary input mode is removed from the list of available modes.
Beep
When enabled, every button press will output a beep tone.
• On : Every button press will output a single beep tone.
• Off : Only press-and-hold button functions will output a double beep tone. ( default )
Prog. Volume
Sets the XDMA7800 to power-on to the same volume level every time.
• Off : The unit will turn on at the last volume level that was set. ( default )
• 1-30 : Choosing a volume level will program the unit to always turn on at that volume.
Power-on
Message
Allows the "Good Morning/Afternoon/Evening" message that may be shown when the
unit is powered on.
Demo mode Enables/disables the demonstration mode for display purposes.
Set Clock
Adjusts the time for the internal clock.
• Press nn to adjust the hours.
• Press ll to adjust the minutes.