12
!
8. Start Up and Operation
Before starting the machine the user must be familiar with the engine
starting and stopping procedure and any safety requirements stated in the
engine manufacturer’s handbook supplied with the unit.
For twin outlet only
- If using machine
with two operators the rated flow will be
split between each outlet.
For example:
If the machine has a
rated flow of 30 Lpm each outlet will
give 15 Lpm.
Twin Outlet
Twin Outlet
NOTE
!
WARNING: Do not let the pump idle in By-Pass for lengthy periods, if you
intend to break from work for more than 3 minutes, switch the machine off.
Should the machine run for a longer period, the temperature of the re-
circulating water will increase rapidly and could risk damaging the pump
seals. Running pressure washers should never be left unattended.
7. Pre-Operation Checks and Set Up
continued
Open the Fuel Tap.
The Fuel Tap is located on
the underside of the fuel tank,
there is a label positioned
on the back of the fuel tank
pointing out its location.
Fuel Tap is in
ON
position here
