12
ZKL 3000 RC
7. CONTINUATION INSTALLING THE ZKL 3000 RC
In case the following steps do not yield the same result, please see chapter “Troubleshooting”
The status is shown as:
• Ensure detection quality is at least 80%. If this is not possible,
see the chapter “Placing ZKL 3000 RC in the track”
• From the ‘ON’ position, rotate the override key back to ‘OPERATIONAL’ and check the
real-time status again
The status is shown as:
• From the ‘OPERATIONAL’ position, switch the override key to ‘OFF’ and once again
check the real-time status
The status is shown as:
The ‘detection quality date/time’ field reports the last time the ZKL 3000 RC was switched on
and detection was OK.
• From the position OFF, reset the key switch to OPERATIONAL and check the real-time
status again
The status is shown as:
• The functional test is now complete
• Finally, set the ZKL 3000 RC to OFF-OPERATIONAL by using the override key.
This will ensure the ZKL 3000 RC is ready for use remotely
NOTE: It is possible to use the ZKL 3000 RC as a regular ZKL 3000 by leaving it in the ON
position. Do not use ZKL 3000 RC if you are not sure that the system is functioning properly.
>
>
index
>
