DTY Eucalyptus OF-1009, Manual, Page: 5 / 6

Eucalyptus Stacking Arm Chair OF-1009 www.DTYStore.com
Page 5 of 6
Step 3
a. Use two Long Flat-Head Screws (4) to loosely attach the Left Brace (7) to the inside of the Left front
leg.
b. Use two Short Hex Screws (5) to loosely attach the Left Brace (7) to the Seat.
c. In the same way attach the Right Brace (8).
After all Screws are inserted, fully tighten all Screws.
b
a
c
Use eight Short Flat-Head Screws (6)
to attach the two metal L-Brackets (9) to
the underside of the Seat and Back Legs.
Step 4
Peel and stick the Rubber Pads (10) on each L-Bracket (9). They will protect
the seat of the chairs when they are stacked.
Post-Assembly Instructions:

Remove cushions before stacking.

Caution: Do not stand on chairs. Do not tilt a chair on two legs while sitting in the chair.
Periodically check the fasteners to be sure they remain tight.
Item Drawing Qty
4 4
5 4
6 8
Item Drawing Qty
1
0
10
4