Broadmoor Wood Bench OF-1001
Page 3 of 5
www.DTYStore.com
Assembly Instructions:
Step 1
Wait to fully tighten all hardware
until the end of Step 3.
Use two Bolts/Barrel Nuts (1)
and one Long Screw (2) to
loosely attach the Right Side (D)
to the Back (A).
Use one Long Screw (2) to
loosely attach the Front (B) to
the Right Side (D).
Be sure the
block is at the bottom.
Use one Medium Screw (3) with
to loosely attach the Cross-
Bar (C) to the Right Leg.
Block should be on the
inside at the bottom
Step 2
Use two Bolts/Barrel Nuts (1), two Long Screws (2), and one Medium Screw (3) with Hex Wrench (5) to
loosely attach the Left Leg (E) to the Back (A), Seat Cross-Bar (B) and Leg Cross-Bar (C).
Item
Drawing
Qty
1
2
2
2
3
1
Item
Drawing
Qty
1
2
2
2
3
1
