DTX Big Dawg Operating Manual Download Page 3

1. You will need this manual for the safety warnings 

and precautions, operating, inspection, mainte-
nance and cleaning procedures. Keep your 
invoice with this manual. Write the invoice number 
on the inside of the front cover. 

Keep this manual 

and invoice in a safe and dry place for future 
reference.

 

2. The warnings, cautions and instructions dis-

cussed in this instruction manual cannot cover all 
possible conditions and situations that may occur. 
It must be understood by the operator that 
common sense and caution are factors which 
cannot be built into this product, but must be 
supplied by the operator.

3.

NEVER 

use this product for anything other than 

its intended use. 

NEVER 

modify this product. 

Failure to comply with the precautions, warnings 
and recommendations in this manual will nullify 
your warranty and may result in injury or even 
death.

4

.

ALWAYS

 ensure that this hot dog roller is 

plugged into a grounded outlet with the proper 
power supply available.

5.

DO NOT 

unplug the machine by pulling or 

tugging on the power cord. Firmly grasp the plug 
and remove from outlet.

6.

MAKE SURE

 that the power outlet, plug and 

power cords used are in good condition. Worn, 
frayed or damaged plugs, cords and outlets 
should be replaced or repaired by a certified 
electrician who is properly qualified to meet local 
safety and electrical codes. Power supply cords 
should be replaced by the manufacturer. 

AVOID using extension cords or 3-prong 
adaptors.

7. To reduce the risk of electrical shock or fire, 

MAKE SURE

 that your unit is properly grounded. 

NEVER TAMPER WITH, REMOVE OR CUT THE 
GROUNDING PIN!!

 The wall outlet used with this 

roller 

MUST 

be properly grounded. If you do not 

have a grounded outlet, have one installed by a 
certified electrician who is properly qualified to 
meet local safety and electrical codes. 

8

.

Make sure your machine is unplugged when you 
conduct any maintenance or repair. A qualified 
service technician should always perform service 
or repair.

9. This product is certified for household or 

commercial use.

10

.

Do not cover the power cord.

 

DO NOT

 immerse 

cord in water or use in high traffic areas. 

DO NOT

 

run cord over carpets or heating sources or 
elements. 

NEVER

 use with damaged cords or 

plugs.

GENERAL SAFETY PRECAUTIONS

11.

INTENDED FOR UPRIGHT, FREESTANDING 
USE ONLY.

 Do not install in cabinet or enclosed 

spaces. 

12.

DO NOT operate with missing or broken parts

.

 

13

. This product is intended for 

INDOOR USE ONLY. 

DO NOT USE OUTDOORS.

14

.

Only qualified repair personnel should perform 
griller service. 

Service or maintenance 

performed by unqualified personnel could result 
in injury. 

15

.

Do not operate this roller in explosive 
atmospheres, such as in the presence of 
flammable liquids, gases, or dust. 

16

.

DO NOT 

tamper with or modify the controls.

 

17

.

KEEP UPRIGHT

 when transporting. 

 DO NOT 

UPEND OR TURN UPSIDE DOWN. 

Copyright 2010 DTX International

3

SPECIFICATIONS

Model

Rollers

Temp

Power

Voltage

Dimensions

5

110V

1KW

0-250 C

Big Dawg

Top Dawg

Mad Dawg

7

9

0-250 C

0-250 C

1.4KW

1.8KW

22.8” x 10” x 6.7”

22.8” x 13” x 6.7”

22.8” x 16” x 6.7”

STORAGE & TRANSPORTATION

NEVER STORE UPSIDE DOWN

When storing any hot dog roller, first be sure to

 

DISCONNECT FROM POWER SUPPLY

Store away from moisture and flammable materials, 
fumes and chemicals.
Cover when stored for long periods to prevent dust 
buildup.
When transporting the roller/grill, 

AVOID EXCESSIVE 

VIBRATION

.

KEEP UPRIGHT

 when transporting. 

 DO NOT UPEND OR 

TURN UPSIDE DOWN. 

110V

110V

Ultra Dawg

11

0-250 C

1.8KW

22.8” x 16” x 6.7”

110V

4095

5

0-250 C

0.5KW

110V

17.7” x 12” x 7.8”

Reviews: