Air Nozzle
4. Turn on the compressor by
switching the ON/OFF
rocker switch located on
top of compressor to ON.
3. Next, attach air hose nozzle (with proper tip
adapter, depending upon what you need to
inflate)(see examples at right) securely to the tire
or object to be inflated. Be sure adapter/hose is
fastened securely and that there are no air leaks.
Air Nozzle direct to tire valve.
Air Nozzle with
Woods/Dunlop
bicycle valve.
Air Nozzle with
standard inflater valve.
Air Nozzle with ball
needle sport valve.
Safety light, switch.
5. Watch the pressure gauge to make sure that you
do not over-inflate your tire or toys.
REMEMBER: NEVER EXCEED THE
RECOMMENDED PRESSURE RATING. OVER-
INFLATION CAN RESULT IN TIRE BURSTING
OR EXPLOSION AND SERIOUS INJURY MAY
RESULT!
Usual inflation time is approximately 2-3 minutes
to reach 30-35 PSI.
6. When the recommended pressure has been
achieved, shut the compressor off by toggling
the rocker switch to the OFF position. Remove
hose and disconnect the air pump from the 12V
power source.
SAFETY LIGHT
A safety light is built into the Rad
Co-Pilot Air Compressor to aid in dark conditions
and serve as a safety beacon to on coming
traffic.
1. Remove unit from case and plug in the 12V DC cigarette lighter adapter to the cigarette lighter of your
vehicle. Note: some vehicles may have a second 12V port as well.
2. Turn on your vehicle.
OPERATING INSTRUCTIONS
©
Copyright 2012 DTX International
