TUNING INSTRUCTIONS
3
Step 1
Step 3
Step 2
When your set-top-box is switched on for the first
time, a Welcome Page will be displayed. Use the
buttons to select the Aspect Ratio and press
the OK button on the remote control or the Unit to
confirm.
The receiver will display the channels found and the
progress bar while searching. Once all the channels
are found the receiver will save the channels and exit
automatically. You can then begin watching your
programmes.
Troubleshooting
If you get a "Tuning Failed" or "Database Empty" message, please try the following:
1) Check your connections to the UHF Antenna.
2) Ensure your Antenna is installed correctly.
3) Retry installation after performing "Factory Default"
The receiver will automatically detect the signal
and will show progress and signal quality. Once a
signal is found, the receiver will begin searching for
channels.
For further assistance you can check for more information on the DTV Solutions website, www.dtvs.co.nz or call the help line number. 0800 388 765