TUNING INSTRUCTIONS
3
Step 2
Step 1
Step 4
Step 3
When your set-top-box is switched on for the first
time, a Setup Screen will be displayed. Use the
buttons to select the region and press the
OK button on the remote control or the Unit to
confirm.
Plug in the mains plug into the mains socket after
you have completed all the connections.
Then you can turn switch on on rear panel of your
set-top-box.
During the channel search, the channel found will
be displayed. Please allow a few minutes for the
channels to be tuned in.
Troubleshooting
If you get a "Tuning Failed" or "Database Empty" message, please try the following:
1) Check your connections to the satellite dish.
2) Ensure your dish is installed correctly.
3) Retry installation after performing "Factory Default"
For further assistance you can check for more information on the DTV Solutions website, www.dtvs.co.nz or call the
help line number. 0800 388 765
Step 5
Once all the channels are found the receiver will save the channels and exit automatically and you can begin watching
the channels.
The receiver will automatically detect the signal
and will show progress and signal quality. Once a
signal is found, the receiver will begin searching for
channels.