DMX Addresses
Xm1200 can be used in two different modes: 30 or 18 DMX channels.
If you want to use the XM1200 in 18 channels mode, select the 18 CH mode from the MODE menu and
set the following addresses on the mixer:
Projector 1
A001
Projector 2
A019
If you want to select the next projector, just add “18”
Projector 3
A037
…..
A….
projector 6
A073
If you want to use the XM1200 in 30 channels mode, select the 30 CH mode from the MODE menu and
set the following addresses:
Projector 1
A001
Projector 2
A031
If you want to select the next projector, just add “30”
Projector 3
A061
…..
A….
Projector 6
A151
Changing the DMX address
1) Press the UP-DOWN key until you reach the required DMX number. The numbers on the display will
start to flash (but the new DMX address hasn't yet been set).
2) Press ENTER to confirm your selection. The numbers on the display will stop flashing and the
projector is now controlled by the new DMX address.
TRICKS:
if you keep pushed the UP or DOWN keys, the channels are calculated more quickly and you get a
faster selection.
Pushing UP and DOWN keys together,will set the dmx address to channel 001.
ARC 1200
XM 1200 SPOT
10