DTS HORUS FULL COLOUR, User Manual

Page: 4 / 12

HORUS
WIRING DIAGRAMS
HORUS is provided with 8 poles plug-in screw ter cable length 1 m (HORUS all models)
ACCESSORIES
• Lenses set Spot (HORUS FULL COLOUR) (Code 03.LK.066)
• Lenses set Medium flood (HORUS FULL COLOUR) (Code 03.LK.067)
• Lenses set Wide flood (HORUS FULL COLOUR) (Code 03.LK.068)
• Lenses set Spot (HORUS RGBA / WHITE+AMBER) (Code 03.LK.024)
• Lenses set Medium flood (HORUS RGBA / WHITE+AMBER) (Code 03.LK.025)
• Lenses set Wide flood (HORUS RGBA / WHITE+AMBER) (Code 03.LK.026)
• Z1 PLUS IP20 Power supply / LED controller (Code 03.LA.009.P)
• Z8 IP20 Power supply / LED controller plug-in screw terminals outputs (Code 03.LA.080.V2)
• Z-LIGHT range on-off power supplies also available
IMPORTANT SAFETY INFORMATION
Fire prevention:
Never locate the fixture on any flammable surface.
Minimum distance from flammable materials: 10 cm
Safety:
The external surface of the unit may exceed 50°C, never handle the unit until at least 5 minutes
have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exceed 40°C and should not be lower than -10°C.
Pin 1 = RED +
Pin 2 = RED -
Pin 3 = GREEN +
Pin 4 = GREEN -
Pin 5 = BLUE +
Pin 6 = BLUE -
Pin 7 = AMBER +
Pin 8 = AMBER -
The maximum distance between Z1 PLUS IP20 Power supply / LED controller and the HORUS LED
PROJECTOR (all models) should not exceed 100 meters.
The maximum distance between Z8 IP20 Power supply / LED controller and the HORUS
HORUS should not exceed 100 meters.
The maximum distance between Z8 IP20 Power supply / LED controller and the HORUS
should not exceed 50 meters.
WHITE+AMBER, RGBA
FULL
COLOUR
8 poles plug-in screw terminals
on board (HORUS all models)
4
1---------PIN---------8