DTS Alchemy 7, Manual, Page: 16 / 51

RDM – DMX – Manual
Ver. 1.01 14 di 47
ALCHEMY 7
MAIN MENU LEVEL 1 LEVEL 2 LEVEL 3 FUNCTION
ETHERNET
Art-Net / sACN signal has the
priority on the DMX signal.
ETH TO DMX
OFF
Allows to enable ETHERNET to
RDM/DMX operation.
Default = OFF.
ON
In this configuration the first unit
works as an Ethernet to DMX
converter and sends RDM/DMX
signal to its DMX output
connector.
NO SIGNAL
KEEP LAST
Allows to set the desired
unit’s behavior in case Art-Net
or sACN signal is missing or not
available.
Keep last valid Art-Net or
sACN signal (Default).
BLACKOUT Black-out.
PAN
DIRECTION
NORMAL
Allows to set the Pan
movement.
Normal or Reverse.
Default = Normal
REVERSE
TILT
DIRECTION
NORMAL
Allows to set the Tilt movement.
Normal or Reverse.
Default = Normal
REVERSE
ZOOM
DIRECTION
NORMAL
Allows to set the Zoom
movement.
Normal or Reverse.
Default = Normal
REVERSE
OPERATING
MODE
SILENT
Reduced Pan-Tilt-Zoom-Fans
speed for low noise operation
(Default).
ULTRASILENT
Reduced Pan-Tilt-Zoom-Fans
speed for ultra low noise
operation.
STANDARD
Pan-Tilt-Zoom-Fans standard
speed.
FAN MODE
(FAN MODE will
work relatively
to OPERATING
MODE)
CONSTANT
Same fans speed in any
working condition in SILENT,
ULTRASILENT and
STANDARD operating mode
(Default).
AUTOMATIC
Automatic fans speed.
If LED temperature <40°C: fans
OFF.
If LED temperature >40°C:
If OPERATING MODE =
SILENT, fans speed is
increased within the values
range set in SILENT mode;
If OPERATING MODE =
ULTRASILENT, fans speed is
increased within values range
set in ULTRASILENT mode;
If OPERATING MODE =
STANDARD, fans speed is
increased within values range
set in STANDARD mode.
DISPLAY
FLIP
AUTO
Reverses display’s reading
depending on the mounting
position. Automatic, on the
ground or suspended.
Automatic (Default).
ON THE GROUND
SUSPENDED
STANDBY
DISABLED
Display stand-by disabled
(Default).
ENABLED
Display goes OFF after 5
seconds.