DTS 03.E1271 User Manual Download Page 6

Re e v r

c i e

6

AC Power input
(90-250 VAC)

DC Power in (12 VDC)

DMX OUT (XLR female 5 pins)

ANTENNA RECEIVER:
1)Attach the stadard antenna to the rear panel.
2)Link the ANTENNA DMX output to the projector’s DMX input connector.
3)Connect power to the unit either via the AC power input (90 to 250 VAC), the DC power input 
(12 VDC) or via the DMX bypass Rj45 socket (12 VDC).

To link with a transmitter

1)Ensure that this receiver is not linked with any other transmitter (leds should be solid red)
2)On the transmitter unit, press and release the FUNCTION button.
The transmitter will scan for all unlinked receives for a period of 10 seconds.
3)If succesfull, the receiver’s leds will goes solid green.

To unlink from a transmitter

1)On the receiver, press and hold the FUNCTION button untill the leds will goes on solid red.
The receiver is now unlinked.

Reserved

DMXout (RJ 45)

1 : DMX -
2 : DMX +
3 : N.C.
4 : N.C.
5 : N.C.
6 : N.C.
7 : Signal Ground
8 : N.C.

DMX out,
DC power in (Rj45)

1 : DMX -
2 : DMX +
3 : N.C.
4 : +12 VDC
5 : +12 VDC
6 : N.C.
7 : Signal Ground
8 : DC Ground

Installation

Summary of Contents for 03.E1271









Reviews: