7
6- IMPORTANT SAFETY INFORMATION
6.1 Fire prevention:
Minimum distance from the closest illuminable surface: 0,5 m.
6.2 Prevention of electric shock:
Class II LED product according to standard IEC 60598-1.
6.3 Safety:
Risk group 2 product according to IEC 62471.
CAUTION. Do not look directly into the light output. May be harmful to the eyes and
skin.
Do not stare at the operating light source.
The unit is not for household use and must be installed by a qualified electrician or
experienced person.
LEDs are not replaceable.
The external surface of the unit may exeed 50°C; never handle the unit until at least
5 minutes have elapsed since the unit was turned off.
Never install the unit in an enclosed area lacking sufficient air flow.
The ambient temperature should not exeed 40°C.
Refer to local norms in case of underwater installation. Max immersion depth: 2 m.
6.4 Maintenance:
DONUT is made on Bronze and 316 Stainless Steel.
Bronze:
Bronze is a durable material with strong anti-corrosion properties.
Bronze can be easily scratched or marred with improper care and it oxidizes if not
periodically maintained. Routine cleaning and polishing are required in order to
maintain the brilliance of the surface.
Always wear clean gloves when handling the unit, direct contact with bare hands may
cause a fast oxidation of the handled surface.
Do not expose the unit to air contaminants as heavy exhaust or solvent fumes.
Do not use cleaning or polishing products containing harsh chemicals (ammonia or
chlorine) or abrasive chemicals.
Do not use any cleaning towels that are abrasive. Use only microfiber towels. If unsure
about the suitability of a product for cleaning bronze, contact DTS.
Maintenance period can vary depending on water quality and environment conditions.
!
!
