background image

23

5.2

IDE DRIVERS INSTALLATION

INF files enable the Intel® 810 and Intel® 820 Chipsets to be recognized by listed
operating systems.  This installer will unpack updated .INF files into a specified
folder.

Supported operating system:

Microsoft Windows* 95 OSR2.1+ and Windows*
98 operating system

Chipset:

Intel® 810 and Intel® 820 Chipsets

Browse the All-in-one Multimedia CD-ROM to the directory \Intel\82810\IDEinf\
and click setup.exe.

5.3

AUDIO/AC97 ON BOARD DRIVERS
INSTALLATION

I.

 

AD1881 AC97 Audio Drivers for Win98

1.

 

Run \AD\1881\WDM\SETUP.EXE, then restart to take effect

2.

 

The system will search for new drivers for PCI Multimedia Audio
Device
.  Click Next, then finish to have an unknown? device

3.

 

Then get into Control Panel -> System -> Device Manager -> Other
Device -> PCI Multimedia Audio Device -> Driver -> Update Drivers
-> Next

4.

 

Select Display a list of all drivers -> Sound, Video and Game
controller -> Analog Device Inc. -> Next -> Yes

5.

 

Select Next again, then browse the Win98 installation CD-ROM to
\Win98 directory, then click OK to finish the drivers installation

II.

 

AD1881 AC97 Audio Drivers for WinNT

Run \AD1881\WINNT\SETUP.EXE and follow the instructions to complete
the drivers installation.

5.4

LAN DRIVERS INSTALLATION

Please reference to the directory Realtech on All-In-One CD-ROM drivers and
execute the HELP8139 to get a help menu of the drivers installation.

Summary of Contents for PRM-68I







































Reviews: