DTK PAM-0057V, User Manual

Page: 49 / 58

Flash and DMI Utility
43
Use the
? ?
(left-right) cursors to move the top menu items and the
? ?
(up-down) cursor to
move between the left hand menu items. The bottom of the screen will show the available keys
for each screen. Press enter at the menu item to enter the right hand screen for editing. “Edit
component” appears on top. The reversed color field is the current cursor position and the blue
text are available for editing. The orange text shows auto-detected information and are not
available for editing. The blue text “Press [ENTER] for detail” contains a second pop-up menu is
available, use the + - (plus-minus) keys to change the settings. Enter to exit and save, ESC to
exit and not save.
If the user has made changes, ESC will prompt you to answer Y or N. Enter Y to go back to the
left-hand screen and save, enter N to go back to left-hand screen and not save. If editing has not
been made, ESC will send you back to the left hand menu without any messages.
Add DMI
This DMI Configuration Utility also allows the system integrator or end user to add additional
information into the DMI database such as serial numbers, housing configurations, and vendor
information. Those information not detected by the motherboard BIOS and has to be manually
entered through the DMI Configuration Utility and updated into the DMI database.