PRORXD Broadcast Receiver User Guide
Commercial in Confidence
Revision 12.1
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2014-2019 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Page 5-24
5.6.7
Apply Button
When you change a parameter you must click the Apply button for the changes to be saved.
5.6.8
Refresh Button
If you make changes to parameters but do not click
Apply
, you can click the
Refresh
button to return the
screen to the current settings.
5.6.9
Set Clock
The PRORX-D has an on board real time clock battery which will allow you to set the time and date for the
unit.
When you click the Set Clock button, a window will open which will allow you to enter the current date and
time.
5.6.10
Set Password
You can set a password for your PRORX-D to provide a secure login for anyone wishing to view the web
browser control.
When you click on the
Set Password
button, a window will open which will allow you to change the
password.
You will need to know your old password if you have previously set one (if not leave this blank), check the
Enable
Password
box and enter and confirm your
New Password
.
You will immediately be presented with a login dialogue for your web browser. Enter the
User Name
as
admin
, which cannot
be
edited, and your
Password
to re-login to your PRORX-D.
If you wish to reset your PRORX-D so that it no longer requires a password login, uncheck the
Enable
Password
box and enter your
Old
Password
.
Note
: If you forget the password and have been locked out, follow the instructions to reset the password in
Section 4.2.4