Contents
6. Technical Specification
1)
Tramp MP3 Panel
2)
Operating Instructions
3)
Battery Operation & Recharging
4)
Important Notes
5)
Warranty Information
6) Technical Specification
Amplifier
Specification
Max. Power Output
RMS 50-Watt
Number of Mic Inputs
1 x Wired Microphone, 1/4” Phone jack
1 x UHF Wireless Microphone (UHF 16-Ch Selectable)
Operation
Approx. 4 ~ 5 hours depending on operating condition
Volume Control
1 x Wired Microphone
1 x Wireless Microphone
Tone Control
1 x Treble / Bass
Aux. Input/Output
1 x In-RCA / 1 x Out-RCA with Volume control
Speaker
Full range 6” D 2” Tweeter
Built-In Battery
12V/3.2A, Rechargeable & Explosion-proof
Charging
Approx. 10 hours for a Single charge
Discharge Protection
10.4V (Factory set: Lowest voltage for ABMR)
Battery Indicator
Monitoring by 4 LEDs
AC/DC Adapter (SMPS)
AC100-240V 50-60Hz / DC15-16V/3A UL/CE/CSA/TÜV
Weight
Approx. 6.9kg-Nett
Dimensions
280mm(H) x 205mm(W) x 245mm(L) Nett
Wireless System
Specification
Carrier Frequency
UHF 863-865MHz (Other frequencies are optional)
Pre-set Frequency
16-Ch Selectable Frequencies
Frequency Stability
±0.005%
Modulation
PLL Synthesized
Frequency Response
50Hz – 15khz ±2dB
Max. Distortion
³0.3% at 1kHz, 15kHz DAV
Dynamic Range
More than 90dB
RF Transmitter Power
10mW (Can be adjusted basing on requlation)
Max. SPL
110dB SPL
Receiving Method
F3E
S/N (15kHz DAV 100mV)
More than 90dB
MP3 Player
Specification
Internal Memory
Built-in 64MB NAND Memory
External Memory
Support In-slot SD Card up to 1 GB
USB Version
1.1
Recording
About 60min (Sampling of 48K)
EQ
Jazz, Classic, Rock, Pop, Normal
Display
LCD with Back-light
Repeat
A-B Repeat Fuction
Driver
Plug & Play over Windows98
