Contents
6. Technical Specification
1)
Champ-US Panel
2)
Operating Instructions
3)
Battery Operation & Recharging
4)
Important Notes
5)
Warranty Information
6)
Technical Specification
Amplifier
Specification
Power Output
RMS-100Watt
No. of Mic Input
1 x Wired Microphone by combination jack
1 x UHF Wireless Microphone (Other frequencies are option)
Volume Control
1 x Wired Microphone
1 x Wireless Microphone
1 x Aux
Tone Control
1 x Treble, Independent / 1 x Bass, ±12dB Independent
Operation
Approx. 4 ~ 5 hours (Depending on operating condition)
Aux. Input/Output
1 x In-RCA / 1 x Out-RCA
Voice-over
Adjustable 0 ~ 100% / 0 ~ max. 1.5sec.
Digital Echo
CMOS 44K memory / Delay time: 31ms ~ 340ms
Speaker
8” Dynamic Full range + 2.5” Tweeter
External Speaker
>16Ω
Built-In Battery
12V/14AH, Rechargeable & Sealed
Charging
Approx. 10 - 12hours for a Single charge
Discharge Protection
10.6V (Factory set: Lowest voltage for ABMR)
AC/DC Adapter (SMPS)
AC100-240V 50-60Hz / DC15/4.5A UL/CE/CSA/TÜV
Weight
Approx. 17Kg-Nett
Dimensions
270mm(L) x 270mm(W) x 410mm(H) Nett
350mm(L) x 350mm(W) x 560mm(H) Gross
Wireless Receiver
Specification
Carrier Frequency
UHF 863 ~ 865MHz (Other UHF/VHF Frequencies are option)
Oscillation Mode
PLL Synthesized
No of Channel
Single-Ch (Option Dual-Ch)
Preset Frequency
16-Frequencies
Bandwidth
24MHz
Modulation Mode
FM (F3E)
S/N Ratio
>105dB
THD
<0.5% @1KHz
Frequency Response
50Hz~18KHz
Wireless Transmitter
Specification
Carrier Frequency
UHF 863 ~ 865MHz (Other UHF/VHF Frequencies are option)
Oscillation Mode
PLL Synthesized
Bandwidth
24MHz
RF Output
10mW (Can be adjusted basing on regulation)
Spurious
<-55dBc
Battery
2 × 1.5V AA Type
Current Drain
30~35mA, Typical
Weight
240g
USB/SD-Card Player
Specification
USB Player
Support MP3-USB with USB2.0
Function
Mode, 10 / -10 , F / B ward, Volume
External Memory
Unlimited
