Contents
6. Technical Specification
Amplifier
Specification
Max. Power Output
RMS100-Watt
No. of Mic Input
1 x Wired Microphone by combination jack
1 x UHF Wireless Microphone (Other frequencies are option)
Volume Control
1 x Wired Microphone
1 x Wireless Microphone
1 x Aux
Tone Control
1 x Treble, Independent
1 x Bass, Independent
Aux. Input/Output
1 x In-RCA / 1 x Out-RCA
Speaker
8” Dynamic Full range + 2” Tweeter
External Speaker
>16Ω
Built-In Battery
12V/14A, Rechargeable & Explosion-proof
Charging
Approx. 12-hours for a Single charge
Discharge Protection
10.4V (Factory set: Lowest voltage for ABMR)
AC/DC Adapter (SMPS)
AC100-240V 50-60Hz / DC15-16V/4.5A UL/CE/CSA/TÜV
Weight
Approx. 16Kg-Nett
Dimensions
270mm(L) x 270mm(W) x 420mm(H) Nett
350mm(L) x 350mm(W) x 560mm(H) Gross
Wireless System
Specification
Carrier Frequency
UHF 863-865MHz (Other frequencies are optional)
Pre-set Frequency
16-Ch Selectable Frequencies
Frequency Stability
±0.002%
Modulation
PLL Synthesized
Frequency Response
50Hz – 15khz ±2dB
Max. Distortion
≥0.3% at 1kHz, 15kHz DAV
Dynamic Range
More than 90dB
RF Transmitter Power
10mW (Can be adjusted basing on regulation)
Max. SPL
110dB SPL
Receiving Method
F3E
S/N (15kHz DAV 100µV)
More than 90dB
ESP CD Deck
Specification
Function
Play, Eject, Up-Down, Scan, Repeat
Shock Proof
Mechanical shock proof + ESP 40sec
Output Level
1.3V ± 2dB / 1KHz 0dB
Frequency Response
20Hz/-0.5±1dB, 100Hz/0±1dB, 10KHz/0±2dB, 20KHz/-1±2dB
Separation
More than 80dB / 1KHz
S/N Ratio
More than 80dB / 1KHz
THD
Less than 0.3% / 1KHz
1)
Champ-CD Panel
2)
Operating Instructions
3)
Battery Operation & Recharging
4)
Important Notes
5)
Warranty Information
6)
Technical Specification
