DT 2-wire, Technical Manual, Page: 47 / 52

DT - System - Technical Guide 44
Interface Preview
1. Main Menu (Infomation Menu)
The
Information
tab shows the
product
Model
,
Hardware Version
,
Software Version
,
Serial No.
,
Access Control
,
Access Card
Number
information.
On the
Installer's Information
tab,
user can input the
Project Name
and
Block Name
for this Door Station.
Note:
Series No.
is a unique number
programmed in factory and used
for tracking. Refer to the software
document in the disk for detail
infomations.
2. Paremeters Menu
The Parameter Menu is for the timing
settings for the system. it includes the
following settings:
•
Monitor Timing
: For the
maximun monitoring time setting.
•
Camera Swithing Timing
:
The surveillance time for each
Door Station or CCTV camera.
•
Wait Timing
: To set call wait and
ring time, if Monitor don’t answer a
call within this time, calling will be
canceled.
•
TalkTiming
: Set limitation time
of talking.
•
Unlock Timing
: To set the time
that how long the door keeps open
when lock is released.
•
Mon Speak
: To enable the talking with the Door Station when the Monitor is under monitoring state.
•
Mon Unlock
: To enable the door lock opening operation when the Monitor is under monitoring state.
•
Unlock Relay
: To select the unlock relay mode for different lock types.