CLASSIC Wheels - Technical Manual
20
Ma
in
te
n
a
n
ce o
f th
e Re
ar
Wh
ee
l
Hu
b [
R
a
tch
et Syst
em]
V2
01
5.
0
6
_E
N
Putting on the Rotor and the End Caps
3.
Put on both star ratchets (fig. 4-1/11) and the se-
cond spring (fig. 4-1/10).
The small diameter of the spring must be placed
on the star ratchet.
1.
Grease the rotor and put it onto the hub.
2.
Check if the rotor can be turned easily and if the
star ratchets are locking.
3.
Grease both bearings and the contact surface of
the end caps (fig. 4-1/1/13).
Required material, see table on page 17.
4.
Put both end caps (fig. 4-1/1/13) onto the hub by
hand.
Note: The short end cap must be placed on the drive
side.
