DT395
Button Management
Where supported by software, many of the hard buttons on the DT395 are programmable
to perform a function of the user’s choice. The exception is the Power Button and the
SAS Button. To activate the button re-assignment application, invoke the Button Agent
application, e.g., in Windows XP Embedded.
Brightness Control
Where supported by device firmware and software, a hard button may be engaged to
manipulate the display brightness. Press the System Menu button (Button 7) on the front
of the DT395. The System screen will display a Brightness control section with up and
down arrows that can be activated with the stylus.
Battery and Power Management
The DT395 is equipped with an internal 3760mAh Li-Ion battery pack that is capable of
supporting approximately 3 - 4 hours of continuous operation. With the internal battery
and an external battery pack that clips (hot-pluggable) onto the back of the device, the
maximum period of continuous operation will be approximately 6 – 8 hours. The period
between battery recharges can be significantly lengthened by putting the device into
Standby mode through the Power Button (see Buttons Function Table) whenever the
device is not in use. Depending on the operating software, the DT395 may also be
configured to enter various power-saving modes via the Power Button
or through timed entry.
Full Slot Smart Card Reader
The DT395 comes with a full slot smart card reader.
Remove the rubber and insert a card (Picture 1)
Use the stylus to pull the metal pull and then remove the card (Picture 2)
Desktop Cradle (optional)
The DT395 is complemented by an optional Desktop Cradle for support, passthrough
charging, and connection to a range of USB peripherals, including keyboard and mouse.
The Cradle offers the following interfaces: a DC-in port for the AC-DC adapter, an
Ethernet port, and USB ports. Always seat the DT395 securely onto the cradle. The
cradle must be powered by the AC-DC adapter for the Ethernet and USB ports to
function. The battery packs on the DT395 may be recharged by connecting the AC-DC
adapter directly to the DC-in port on the DT395 or through the DC-in port on the Desktop
Cradle while the DT395 is docked to the Cradle.
USING THE DT395
Memory configuration
The
DT395
is available with 2GB memory configurations. Storage options currently range
from 32GB to 256GB flash memory.
Peripherals Support
Through its USB port, the DT395 supports a wide range of USB-based peripherals. These
peripherals are applicable for software installation, applications storage, data storage, docking
or software recovery and update.
The DT395 is complemented by an optional Desktop Cradle or Wall/ Vehicle Mount
Cradle for support, pass-through charging, and connection to a range of USB peripherals,
including keyboard and mouse. The Cradles offer the following interfaces: a DC-in port
for the AC-DC adapter, an Ethernet port, a VGA output and USB ports. Always seat the
DT395 securely onto the cradle. The cradle must be powered by the AC-DC adapter for
the Ethernet and USB ports to function. The battery packs on the DT395 may be
recharged by connecting the AC-DC adapter directly to the DC-in port on the DT395 or
through the DC-in port on the Cradle while the DT395 is docked.
For More Support
Users can download the Software Utility and Modules Operation Guides from the DT
Research website.
If the DT395 comes with a 3G module, please contact your product and/or service
provider for the SIM Card Slot Location and Insertion Guide.
ENGLISH
6
7
ENGLISH
