5
UHF RFID Reader:
The optional UHF RFID reader supports EPC Gen2V2 and ISO 18000-63 standard. To
develop an application to use the UHF RFID reader, contact your device provider for a
UHF RFID reader API package.
Data Capture Module Operation Guide
If your DT363GL/ 363Q comes with a RFID Reader, refer to the steps below to configure
the settings.
NOTE:
To ensure optimal system performance, turn on only the symbologies you are going
to use.
4
Start Up
I
f the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Wireless Networking
Wireless LAN
The DT363GL/ 363Q
is often delivered with an embedded (user-inaccessible)
802.11ac LAN adapter equipped with a hidden custom antenna.
• Through the support of typical WLAN adapters, the DT363GL/ 363Q should be
able to detect all 802.11 access points in the vicinity for you to select the access
point of y
our choice for connection.
• T
he SSID and WEP/WPA/WPA2 (if enabled) parameters on the
DT363GL/ 363Q
and the a
ccess points have to match. The SSID is case-sensitive and it is recom
-
mended t
hat you enable WEP/WPA/WPA2 encryption (or advanced alternatives)
for secure access.
• When WEP/WPA/WPA2 is enabled, you may need to consult your network
a
dministrator or your networking equipment literature to properly configure
a
ssociated settings such as Authentication mode, etc.
• R
efer to the access point operating manuals for setting up the 802.11 access
points.
Bluetooth
T
he Bluetooth configuration application is enabled from the Windows System Tray
or from the Android Settings APP. Follow the instructions and options provided
within the application to configure and invoke Bluetooth connectivity with the
corresponding peripherals.