OPERATION
Powering ON and OFF
To activate the DT361DM, push and quickly release the Power Button. The display will
come on in a few seconds. To put the DT361DM in Standby mode, push and quickly
release the Power Button. To turn the DT361DM off for extended storage, power
off safely using any software function that “shuts down computer” provided in the
software operating system.
NOTE:
The battery pack shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT361DM when setting up for the first time to fully
charge the battery pack, or use the optional battery charger kit.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Configuring the Rugged Tablet
The DT361DM may be configured using the utilities and methods dictated by
the software operating system. The DT361DM should be configurable for various
properties such as user profiles, network features, and several system elements.
NVIS Mode and Screen Brightness Control (optional)
•
When power button is pressed to power on the unit, power LED will flash orange
once to indicate the unit is booting. Unit will boot into NVIS mode with zero nit
brightness by default and display will be dark. You can press the “Brightness Up”
and “Brightness Down” buttons to set NVIS mode display to desired brightness
(up to 20 nits)
.
• To toggle between NVIS and high-brightness display
mode, press the “NVIS/
Normal Mode Toggle” button. When changed from NVIS mode to
high-brightness
mode, display brightness percentage will be same as the brightness level set in
NVIS mode before toggling.
• U
se brightness control buttons to set desired brightness level. When changed
from normal display mode to NVIS mode, display brightness will be set to 0 nit
(display is dark) and you need to use brightness control buttons to change display
to desired brightness.
5