background image

 

 

OPERATION 

 

Powering ON and OFF 

To activate the DT317BT, push and quickly release the Power Button. The display will come on in a few 
seconds. To put the DT317BT in Standby mode, push and quickly release the Power Button. To turn the 
DT317BT off for extended storage, power off safely using any software function that “shuts down computer” 
provided in the software operating system. 
 
 

 

                  

NOTE: 

The battery packs shipped with your tablet may be low in power—please use the AC-DC 
adapter with the DT317BT when setting up for the first time to fully charge the internal 
battery pack.   

 

NOTE: 

When the battery pack is charging, the blue-colored Battery LED should blink slowly. If 
plugging in the AC-DC adapter does not trigger this blinking activity and the LED stays dark, 
the battery pack(s) may have been drained substantially. Try unplugging/ replugging the 
AC-DC adapter to the DT317BT a few times to activate the charging process. 

 

NOTE: 

To conserve power, use (push and quick release) the Power Button to put the tablet in 
“Standby” mode while not in use. Pushing briefly on the same button will wake up the system 
within seconds. 

 

NOTE: 

Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the tablet—this form of 
hardware shutdown is intended to be a means of recovery from lockups, and not as normal 
operation. 

 

 
 
 
 
 
 
 

ENGLISH

   

4

 

 

 

 

Summary of Contents for DT317BT












Reviews: