DT315CT/ DT315CT-MD
ENGLISH
6
7
ENGLISH
USING THE Mobile Tablet
Peripherals Support
Through its USB port, the DT315CT/ DT315CT-MD supports a wide range of USB-based
peripherals. These peripherals are applicable for software installation, applications
storage, data storage, and system software recovery and updates. The DT315CT/
DT315CT-MD is also compatible with custom mountable cradle options. These securable
and mountable cradles provide an interface to VESA mounts and arms, and to ports that
may include USB, Ethernet, and pass-through power.
Remote Management
Depending on software configuration, the DT315CT/ DT315CT-MD can be centrally
managed for asset monitoring and for software control. Please consult your device
provider.
Button Management
Where supported by software, the hard buttons on the left side of DT315CT/ DT315CT-
MD are programmable to perform a function of the user’s choice. To activate the button
re-assignment application, invoke the Button Manager application
.
Battery and Power Management
The DT315CT/ DT315CT-MD is equipped with an internal 3760mAh Li-Ion battery pack
that is capable of supporting approximately 1.5–2 hours of continuous operation. With
the optional external battery pack that clips (hot-pluggable) onto the back of the tablet,
the maximum period of continuous operation will be approximately 3–4 hours. The
period between battery recharges can be significantly lengthened by putting the device
into Standby mode through the Power Button (see Buttons Function Table) whenever
the tablet is not in use. Depending on the operating software, the DT315CT/ DT315CT-
MD may also be configured to enter various power-saving modes via the Power Button
or through timed entry.
Desktop Cradle
The DT315CT/ DT315CT-MD is complemented by an optional Desktop Cradle for
support, pass-through charging, and connection to a range of USB peripherals, including
keyboard and mouse. The Cradle offers the following interfaces: a DC-in port for the
AC-DC adapter, an Ethernet port, a VGA port (optional) and USB ports. Always seat the
DT315CT/ DT315CT-MD securely onto the cradle. The cradle must be powered by the
AC-DC adapter for the Ethernet and USB ports to function. The battery packs on the
DT315CT/ DT315CT-MD may be recharged by connecting the AC-DC adapter directly to
the DC-in port on the DT315CT/ DT315CT-MD or through the DC-in port on the Desktop
Cradle while the DT315CT/ DT315CT-MD is docked to the Cradle.
Bluetooth
The DT315CT/ DT315CT-MD features a built-in Bluetooth adapter that operates on
the Microsoft Windows Bluetooth protocol. The Bluetooth configuration application is
invoked from the System Tray or from the Control. Follow the instructions and options
provided within the application to configure and invoke Bluetooth connectivity with the
corresponding peripherals.
NOTE: Bluetooth devices or accessories that are not compatible with the Microsoft
Windows Bluetooth protocol may not work with the DT315CT/ DT315CT-MD.
