Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The DT313SC-MD/ DT313T-MD may be configured using the utilities and methods
dictated by the software operating system. The DT313SC-MD/ DT313T-MD should
be configurable for various properties such as user profiles, network features, and
several system elements.
Wireless Networking
Wireless LAN
The DT313SC-MD/ DT313T-MD is often delivered with an embedded (user-
inaccessible) 802.11ac WLAN adapter equipped with a hidden custom antenna.
• T
hrough the support of typical WLAN adapters, the DT313SC-MD/ DT313T-MD
should be able to detect all 802.11 access points in the vicinity for you to select
the access point of your choice for connection.
• T
he SSID and WEP/WPA/WPA2 (if enabled) parameters on the DT313SC-MD/
DT313T-MD and the access points have to match. The SSID is case-sensitive and
it is recommended that you enable WEP/WPA/WPA2 encryption (or advanced
alternatives) for secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
• R
efer to the access point operating manuals for setting up the 802.11 access
points.
Bluetooth
The DT313SC-MD/ DT313T-MD offers the Bluetooth module which supports
Bluetooth 4.0 standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low
Energy, which delivers faster speeds (up to 300 Mbps) with low power consumption.
OPERATION
Powering ON and OFF
To activate the DT313SC-MD/ DT313T-MD, push and quickly release the Power Button.
The display will come on in a few seconds. To put the DT313SC-MD/ DT313T-MD in
Standby mode, push and quickly release the Power Button. To turn the DT313SC-MD/
DT313T-MD off for extended storage, power off safely using any software function that
“shuts down computer” provided in the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the DT313SC-MD/ DT313T-MD when setting up for the
first time to fully charge the internal battery pack. You may charge the external
battery pack with it attached to the DT313SC-MD/ DT313T-MD, or with the
optional external battery charger kit.
NOTE:
When the batterypack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the DT313SC-
MD/ DT313T-MD a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
5
