Start Up
If the power up (from Standby mode or otherwise) is successful, the appropriate
interface will be displayed after a launch sequence of several seconds. The wireless
LAN connection may take 10-15 seconds to be established.
Configuring the Mobile Tablet
The
DT313C/Tmed
may be configured using the utilities and methods dictated by
the software operating system. The
DT313C/Tmed
should be configurable for
various properties such as user profiles, network features, and
several system elements.
Wireless Networking
Wireless LAN
The
DT313C/Tmed
is often delivered with an embedded (user-inaccessible)
802.11ac WLAN adapter equipped with a hidden custom antenna.
• T
hrough the support of typical WLAN adapters, the
DT313C/Tmed
should be
able to detect all 802.11 access points in the vicinity for you to select
the
access point of your choice for connection.
• T
he SSID and WEP/WPA/WPA2 (if enabled) parameters on the
DT313C/Tmed
and the access points have to match. The SSID is case-sensitive and
it is
recommended that you enable WEP/WPA/WPA2 encryption (or advanced
alternatives) for secure access.
•
When WEP/WPA/WPA2 is enabled, you may need to consult your network
administrator or your networking equipment literature to properly configure
associated settings such as Authentication mode, etc.
• R
efer to the access point operating manuals for setting up the 802.11 access
points.
Bluetooth
The
DT313C/Tmed
offers the Bluetooth module which supports Bluetooth 4.0
standard including Bluetooth 3.0 High Speed and Bluetooth 4.0 Low Energy, which
delivers faster speeds (up to 300 Mbps) with low power consumption.
OPERATION
Powering ON and OFF
To activate the
DT313C/Tmed
, push and quickly release the Power Button.
The display
will come on in a few seconds. To put the
DT313C/Tmed
in
Standby mode, push and
quickly release the Power Button. To turn the
DT313C/Tmed
off for extended storage,
power off safely using any software function that “shuts down computer” provided in
the software operating system.
NOTE:
The battery packs shipped with your tablet may be low in power—please use
the AC-DC adapter with the
DT313C/Tmed
when setting up for the first time
to fully charge the internal battery pack. You may charge the external battery
pack with it attached to the
DT313C/Tmed
, or with the optional external
battery charger kit.
NOTE:
When the batterypack(s) is (are) charging, the blue-colored Battery LED should
blink slowly. If plugging in the AC-DC adapter does not trigger this blinking
activity and the LED stays dark, the battery pack(s) may have been drained
substantially. Try unplugging/ replugging the AC-DC adapter to the
DT313C/
Tmed
a few times to activate the charging process.
NOTE:
To conserve power, use (push and quick release) the Power Button to put the
tablet in “Standby” mode while not in use. Pushing briefly on the same button
will wake up the system within seconds.
NOTE:
Avoid using the Power Button (“hold 4+ seconds” feature) to turn off the
tablet—this form of hardware shutdown is intended to be a means of recovery
from lockups, and not as normal operation.
4
5
